Adjusting The Leveling Feet; Installing Equipment - Sun Microsystems 816-6386-10 Guide D'installation

Adjusting the Leveling Feet

1. Use the wrench provided to adjust the vertical position.
FIGURE 1-2

Installing Equipment

Refer to the documentation that came with your equipment for bracket and rail installation
information.
Caution –
install equipment in the lowest part of the rack first, then install a system above that, and so
on.
Caution –
must be deployed.
Sun Rack Installation Guide • November 2002
1-2
Leveling Foot
For safety, equipment should always be loaded from the bottom up. That is,
To prevent the rack from tipping during equipment installation, the anti-tilt bar