THOMSON THFP93510 Manuel D'utilisation page 26

shredding, please fix it on the disc holder (5) first, then seat the disc
holder (5) in driving shaft (4).
ATTENTION:
Put the food into the processing bowl (3) and then close the bowl cover (6)
5.
while using the chopping blade (13) or dough blade (12). When using slicing,
shredding or cutting blade, make sure to lock the bowl cover (6) first,
ingredient should be filled through feed chute after the machine is
Lock the bowl cover (6) and protection cover (8), the safety lock (7) is
6.
active now.
ATTENTION:
7.
with socket, using pulse function or speed l or 2 to confirm
the machine is assembled
unplug the machine and re-assemble it as above.
Maintenance
-
1. Please unplug the power cord to protect from electric
while cleaning the machine,
and power cord in
2. All removable accessories
base, dry the
3. For easy cleaning,
let it run for a
4. Always place the machine in dry and
5. DO NOT use hard (solid) detergent to avoid scratch on product.
6. DO NOT operate the appliance for more than l minute at a
7. If operation is
the machine and let it
operation. If more than 5 rounds of operation are required,
machine to room temperature before the next 5
lengthen lifespan of the
every time it can use only one blade at a
the switch should be in the
well.
water.
can
wet parts after
you can put in some
while when cleaning the bowl and the blender jar.
completed around 1 minute, it is recommended to turn off
cool down for 3 minutes before the next round of
machine.
If there is anything abnormal,
do not immerse the motor base
be cleaned in
cleaning.
warm water
ventilated
EN-11
time.
"0" speed; connect the plug
whether
shock
water except the motor
and detergent and
place.
cool
rounds. This
ready.
stretch.
down the
can