Table des Matières
Publicité
Dimming and Disabling
To dim or turn off the LED, use the brightness fader.
Alimentation sur Ethernet (Power over Ethernet, PoE)
Cet appareil nécessite une PoE pour fonctionner. Il est compatible avec les sources de PoE de Classe 0 et de Classe 3.
L'alimentation via Ethernet est fournie de l'une des manières suivantes :
•
Un commutateur réseau fournissant une PoE
•
Un injecteur de PoE
Reset Button
The hardware reset button is located inside a grille hole and can be pushed with a paperclip or other small tool. The hole is
identified with a gray circle. When looking at the Shure logo, it is the second hole in the fourth row from the top.
Reset Modes
Network reset (press button for 4-8 seconds)
Resets all Shure control and audio network IP settings to factory defaults. Red LED along bar.
Full factory reset (press button for longer than 8 seconds)
Restores all network and web application settings to the factory defaults. Multicolor flash, then blue LED along bar.
Software Reset Options
Reboot Device (Settings > Factory Reset): Power-cycles the device as if it were unplugged from the network. All settings
are retained when the device is rebooted.
Default Settings (Presets > Restore default settings): Restores audio settings back to factory settings (excluding de
vice name, IP settings, and passwords).
Shure Incorporated
11/61
Publicité
Table des Matières
