Table des Matières
Publicité
Default Settings
Microphone Status
Active
Mute
Hardware identification
Firmware update in progress
Reset
Error
Device power-up
Note: When the LED is disabled, the LED still illuminates while the device is powering up and when an error state occurs.
Customizing Lighting Settings
Custom LED brightness, colors, and behaviors are assignable in the control software. They can also be controlled through an
external control system:
1.
Open the Configuration tab
2.
Select Light Bar
Mute LED Behavior
The lighting for mute and active microphone states is configurable to match the behavior of other devices in conference rooms.
In the LIGHT BAR PROPERTIES menu, use the drop-down menus to select LED settings.
LED Behavior / Color
Green (solid)
Red (solid)
Green (flashing)
Green (progresses along bar)
Network reset: Red (progresses along bar)
Factory reset: Triggers device power-up
Red (split, alternate flashing). See the device event log for
details.
Multi-color flash, Blue (moves quickly back and forth across
bar)
Shure Incorporated
10/61
Publicité
Table des Matières
