Thomashilfen Harmony Defender Reha Mode D'emploi page 19

Harmony Defender Reha – CAN Version – 2-in-1 CarSeat – Accessories
Table (accessory)
Mount the side parts of the table first, by pulling them over the armrests of the seat.
(Fig. 6a) The side with the long loop fastener on top of armrest. Guide the hook
straps between seat and back rest so hook straps can be attchached to loop fastener
on inner side of armrests. (Fig. 6b)
TIP: Turn recline knob counterclockwise to open gap at base of backrest to facilitate
passing the hook and loop straps through the gap to secure.
Now attach the table to the hook and loop straps on top of the armrests. Guide the
belt around the back of the seat and fasten it to the hook and loop fastener at the
side of the table.
NOTE: For reasons of space the large crotch pad (item code 832) should be removed
when using the table.
The cover is removable (zipper) and can be maschine washed at up to 30 °C / 86 °F.
Abduction block (accessory)
Assembly:
Before assembling the abduction block, the crotch pad needs to be removed. Open
the 5-point belt and remove the crotch pad by pulling it off the belt buckle. (Fig. 8a)
Remove the base plate underneath seat base unscrewing 4 philips screws. (Fig. 7a)
Grasp metal locking plate of crotch strap and turn it 90 degrees (Fig. 7b) so you can
slide it through through seat base opening to take crotch strap completely out. (Fig.
7c) Push metal locking plate through slit of abduction block from the top. (Fig. 7d)
Guide crotch strap with abduction block back into seat base while sticking metal
locking plate into needed slot position.
Ensure that metal locking plate sits in the right place and buckle is facing froward and
strap is not twisted. Mount the base plate. Please remember to re-attach the crotch
pad.
Adjustment position:
The abduction block has 2 positions. Lift the fabric seat pad on the base of Defen-
der to expose the crotch strap and slot positions. Guide the crotch strap through the
plastic base to the desired slot position.
The cover is removable (zipper) and can be machine washed at up to 30 °C / 86 °F.
To remove the cover, the abduction block first has to be pulled off from the crotch
strap as described above.
item code: 831
item code: 833
19