Before Your First Use; Using Your Appliance; Preparing Your Appliance For Use; How To Change Plates - Ceraflon GRANIT ROYAL Manuel D'instructions

BEFORE YOUR FIRST USE

1. Remove your appliance from the packaging.
2. Before using the unit for the first time, carefully clean the unit and cover.
3. Do not use any aggressive detergents, brushes with metal or nylon bristles or sharp objects such as
knives or spatulas for cleaning the cooking plates by wiping a sponge or cloth dampened in warm
water.
4. Avoid damaging the non-stick coating. Your appliance is now ready for normal use.
5. For best results, lightly coat the cooking plates with a little cooking oil or cooking spray.
6. Dispose of the packaging in a responsible manner.
WARNING: DO NOT immerse the unit in water.

USING YOUR APPLIANCE

PREPARING YOUR APPLIANCE FOR USE

1. Remove the appliance from the packaging and peel off any adhesive labels
2. Pour a teaspoon of vegetable oil onto the non stick coated plates.
3. Wipe over the plates with an absorbent kitchen towel and then wipe off any excess oil.
4. Connect to your electrical supply; the red indicator lamp will switch on to show that the appliance
is pre-heating.
5. Close the lid while the pre-heating occurs. During this time prepare your waffle/sandwich/food
ingredients.
6. The appliance is ready for use once the green indicator illuminates. This will take approximately 5
minutes
7. Initially, the appliance may release a slight harmless odour and smoke. This is a normal occurrence
caused by the initial heating of the heating elements and should not re-occur.

HOW TO CHANGE PLATES

WARNING: Never change the plates when the appliance is hot.
1. Open the appliance.
2. Pull the detaching button to release the cooking plate and remove it in the direction of the arrows.
3. Clip the desired cooking plate into position, push the cooking plate down with a little force until a
click sound has been heard.
12