LEXIBOOK SMBABY1 Mode D'emploi page 16

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
"Baby Monitor" transmission mode
Use the transmission mode switch
transmission mode.
• Noise activated
(default mode): the transmission starts only when noise is detected in the
Baby's room.
• Permanent transmission
Note: This mode will use up the batteries more quickly.
Transmission channel selection
Use the channel
2 or ) for the Baby unit.
Switch the parent unit On/Off
Use the volume switch
lights up when the unit is powered on. Adjust the volume of the baby monitor with the wheel.
Turn the "Baby Monitor" feature On/Off
Press the "Baby Monitor" On/Off button
This function allows you to listen to the child's room.
Transmission channel selection
Use the channel selection switch
unit.
Important note: The channel selected for the Parent unit must be the same as the one chosen
for the Baby unit. If the channels are different, the Parent unit will not be able to receive the data
sent by the Baby unit.
Temperature display in Celsius/Fahrenheit
Use the « Temperature » button
between Celsius and Fahrenheit.
LCD screen icons
1. The temperature and humidity display and the "comfort zone" icons show the condition in the
baby's room (
: outside the comfort zone,
2. The "Sleep Guardian" icons indicate if the "Sleep guardian" function has been switched on and
which mode is selected. If the feature has been activated by the baby crying, these icons will
flash (
: Lightshow mode,
16
located at the back of the Baby unit to select the desired
from the Baby unit to the Parent unit.
selection switch on the back of the unit to select a transmission channel (1,
Using the Parent Unit
on the right side of the Parent unit to turn it on or turn it off. The LED
to switch on or switch off the "Baby Monitor" feature.
to select a transmission channel (1, 2 or ) for the parent
located on the front to toggle the temperature display
: Sounds mode,
: optimal conditions).
: Music mode).
3. The "
. If the
will fla
Note
from
Comfor
Use the
OFF po
ON pos
outside
Note: T
position
To preven
cleaned w
the exterio
the front p
NOTE: Pl
For any cl
warranty c
non-obser
to heat an
services, w
Reference
©2008 LE
Designed
Lexibook
Unit 10 Pe
Bedford R
Hampshir
Helpline: 0

Publicité

Table des Matières
loading

Table des Matières