Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe Rainmaker Select 460 1jet 2401240 Série Mode D'emploi / Instructions De Montage

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower may only be used for bathing, hygiene
and body cleaning purposes.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• The product is not designed to be used with steam
baths!

Technical Data

Operating pressure:
Recommended operating pressure:
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!
Fault
Head shower extremely leaky
4
max. 0,6 MPa
0,2 - 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
max. 60°C
max. 70°C / 4 min
Cause
- Head shower soiled / scaled
Assembly (see page 38)
English

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 41)
i Installation example (see page 32)
Flow diagram (see page 32)
Spare parts (see page 46)
Cleaning (see page 44)
Remedy
- Clean / descale head shower
(see page 44)