Hive Motion Sensor Manuel D'utilisation page 9

When prompted, pull the tab from the
sensor case to start the pairing process.
The LED light on the front will begin to flash
amber while it searches to find your box.
Once your sensor appears on the screen, you
can name it and press Save to complete setup.
Choose a location
2
Find a place that has a good view of the
area you want to monitor, as long as it' s
near enough to your Hive Box, Hive Box
Absolue or signal booster to stay connected.
• Aim for around 2-3m from the floor as
any higher may leave blind spots below.
• Alternatively, you can rest the sensor on
its side on a table or shelf, then you may
not need to fix it to the surface.
• Your sensor can detect motion up to
5m away and has a 94° field of view
when vertical.
The following might trigger a false
motion alert:
• Direct sunlight hitting your sensor.
• Having a window in view (movement
outside a window).
• Having a heat source in view (such as a
hot air blower, a draughty window or an
air conditioning outlet).
Remember: Pets can trigger your motion sensor.
If you don't want this to happen try placing the
sensor where pets won't be seen.