Hive Motion Sensor Manuel D'utilisation page 10

Fix it in place (optional)
3
If you' d like to check the signal before
fixing your sensor in place, you can do
this in the app or online dashboard under
Manage devices.
When fixing the sensor in place, ensure there
is enough space above to slide open the
case for future battery replacement.
Using the adhesive strips:
• Peel strips from the backing paper and
stick to either the back or the angled sides
of the sensor depending on where you' r e
attaching it.
• Wipe the area on the surface where the
adhesive strips will be attached and make
sure it' s dry.
• Remove the backing from the adhesive
strips so that you can firmly place the
sensor on the surface.
Remember: Removing the provided adhesive
strips from wallpaper or paint can leave marks on
the wall.