Spécifications; Dolby Atmos ® Certification - Eltax Monitor ATM Mode D'emploi

UK
SPÉCIFICATIONS
CARACTERISTICS MONITOR ATM
Design
Tweeter
Drivers
19mm
Mid-woofer
120 mm
Power 20 - 100W
Frequency resp. 70 Hz - 20 kHz
Sensitivity 88 dB/W/m
Impedance 8 ohms
Dimensions
L141 x H195 x P248 mm
(with grid)
Weight 2,8 kg
Finish Black
Certifi cation
22
DOLBY ATMOS CERTIFICATION
®
DOLBY ATMOS® is a new technology meant to reproduce surround sound
for cinema and home cinema. This DOLBY ATMOS
sound channels in addition to the Dolby 5.1 or 7.1 format (horizontal plane) and
thus offers a totally immersive audio experience.
In order to have access to this technology and experience the emotion of
DOLBY ATMOS , you have to equip yourself, in addition to your 5.1 or 7.1
®
system, with dedicated loudspeakers in order to emit sound vertically. There
are speakers that are positioned directly in the ceiling, but these require
a considerable amount of time and effort to install. There are also specifi c
speakers that direct the sound to the ceiling from the fl oor. It is this second
solution, certifi ed DOLBY ATMOS ® , that Eltax has adopted, simplifying the
installation process.
These loudspeakers, whose drivers are specifi cally fi ltered and tilted, emit
a sound fi eld towards the ceiling which must imperatively be refl ective.
The sound waves are thus refl ected off of the ceiling to allow the listener to
benefi t from this vertical sound dimension. The rendering is ultra realistic, for
a completely immersive experience in the heart of your movie. You can buy
one or two pairs of ATM speakers, placed at the front (1st pair) and also at the
back (2nd pair) of your dedicated home cinema room, directly on your main
speakers or surround speakers. You can also opt for the IXATM fl oorstanding
loudspeaker with a built-in DOLBY ATMOS
In order to fully enjoy the DOLBY ATMOS
compatible with this technology, and have enough channels and the associated
digital processing technology.
23
process creates vertical
®
module.
®
sound, your amplifi er must be
®