Connections; Burn-In Period; Specifications - Eltax Vintage PWR 1959 Mode D'emploi

EN

CONNECTIONS

It is essential to connect the speakers using the correct polarity. Make sure to
connect the " + " terminal of the speaker (Red) to the " + " output terminal of
the amplifier. Then, make sure to connect the "- " terminal of the speaker (Black)
to the " - " output terminal of the amplifier. A wrong connection would cause a
cribled stereo image and loss of bass. Use high quality speaker cable to perform.

BURN-IN PERIOD

When you take them out of the packaging, the Eltax loudspeakers are not yet able
to reproduce with the same efficiency all the sound frequencies they are supposed
to play. The loudspeakers are complex mechanical assemblies which need a
period of adaptation ("burn-in") to operate at their best and become acclimatized
to the temperature and humidity conditions of your environment.
This burn-in period may last for some weeks, but you can quicken it by operating
the speakers between 100 and 150 hours consecutively, on a moderate volume
with a specific burning-in CD, or by broadcasting a radio station.
6

SPECIFICATIONS

Type
Tweeter
Midrange
Woofer
Bass load
Frequency response
Sensibility
Nominal impedance
Recommended amplification
Power (RMS)
Dimensions (H x W x D)
Net weight
Floorstanding loudspeaker 3 way
2 x 1'' Bullet
Cellulose pulp 6''
Cellulose pulp 15'
Bass reflex - front firing x 2
30 - 22000 Hz +/- 3dB
96 dB / 1m /1W
5 - 8 Ohm
50 - 250 W
250 W
900 x 518 x 385 mm
34 kg
7
EN