WARNING
To avoid the risk of electric shock, do not open the modem.
The modem must be returned to the factory for any repair with RMA re-
quest (Return Material Authorization).
The modem must not be powered directly from the mains power
(110V
/230V
AC
must be powered by a limited power source PS1 (max 15W).
To ensure electromagnetic compatibility, only the cables supplied with the
device can be used.
Use recommended antennas with the product.
The equipment must be used at a distance greater than 20 cm from anyone.
This marking on the product, accessories, packaging or literature
indicates that the product and its electronic accessories (e.g. cable
etc.) should not be disposed of with household waste but should be
handled in appropriate collection and disposal points.
ercogener cannot be held responsible for :
The problems due to an inappropriate use of the GenPro 400e
The problems due to a wrong configuration .
Malfunctions arising from the absence, poor coverage or termina-
tion of cellular networks services.
Malfunctions if the product is used for surveillance of natural per-
sons where human life is at stake .
Any loss of data or income, as well as any special, incidental, conse-
quential or indirect damages .
For unsuitable choice SIM card subscription .
ercogener reserves the right to modify the functionality of its GenPro
400e products without prior notice.
Inverser le pliage pour la version française.
The information and non contractual pictures in this document are given for indication purposes
only. ercogener SAS reserves the right to modify its products and documentation at any time.
EG_GenPro400e_1103_IS_000
), a voltage adapter must be used. In all cases, the modem
AC
Dct_425_01