Initial Commissioning - Auerswald COMfortel 1400 IP Notice D'utilisation

telephone number, in case we need to contact you. To prevent shipping damage, provide suitable transport packaging
(e.g. original packaging with a secondary shipping box).
5. The Manufacturer's Warranty excludes damage caused by mishandling, operating errors, misuse, external
influences, lightning strikes/power surges, modifications to the product and extensions. Also excluded are wearing
parts (e.g. batteries, fuses, rechargeable batteries and memory cards) and damage caused by wearing parts (e.g. if
batteries go flat). Shipping damage, consequential damage, and costs arising from down times and travel times are
also excluded.
6. The warranty is cancelled if repairs are carried out by unauthorised agents.

Initial Commissioning

Connect the telephone as shown in the figure under Connection.
Initial Setup as a System Telephone
Requirements:
• Internal telephone numbers configured on the PBX
In the Setup Assistant, select With PBX search and System telephone.
Follow the instructions that the system then displays for you.
Note: The username is the internal number configured on the PBX. The
password is the password of the internal number.
Initial Setup with a VoIP Provider
Requirements:
• Account configured at a VoIP provider and knowledge of the access data
In the Setup Assistant, select With provider profile and the VoIP provider's
profile. Follow the instructions that the system then displays for you.
Note: You can also make the optional VLAN settings.
Configuration via the Configuration Manager
Requirements:
• PC with this min. screen resolution: 1024 x 768
• Recommended browsers: Mozilla Firefox (current version), Google Chrome
(current version)
• For admin rights if operated as a system telephone: You need to know the
PBX admin username and admin password
1. Enter the IP address of the telephone in the browser.
2. Enter the username and password.
3. Configure the settings you want.