Product Setup; Quick Installation - D-Link DUB-H4 Guide D'installation

PRODUCT
SETUP

QUICK INSTALLATION

4
1. Plug the power adapter into the receptor located on
the back of the DUB-H4. Plug the other end into a wall
outlet. The LED on the DUB-H4 will turn green to indicate
that the hub is receiving power.
2. Plug the smaller (Mini-B USB) end of the included USB
cable into the back of the DUB-H4.
3. Plug the Type A connector end of the included USB
cable into an available USB port on your computer.
4. Your computer will automatically detect and install the
drivers for the DUB-H4. You may now connect USB 2.0
or USB 1.1 devices to any available USB port on the
front of the DUB-H4.
DUB-H4