Denon Professional DN-300C Guide D'utilisation page 7

Playing MP3 Files on a CD
To play MP3 files on a CD:
1. If the unit is off, press the Power button to power it on.
Important: Do not insert a CD when the power is off. Doing so may damage the unit.
2. Do one of the following:
• Insert a CD into the CD slot. (Hold the edges of the CD without touching the recorded surface. Be careful not
to trap your fingers when the disc is drawn into the unit.)
3. Select CD as your desired media type: (described in
4. Select an audio file:
• To move through audio files, turn the Jog Dial on the unit.
• To enter a folder, press and hold the Folder/Time button for 3 seconds and turn the Jog Dial to select a
folder. Press the Jog Dial to enter the folder and scroll with the dial to find a track. Press the dial again to
select a track and press the Play/Pause button to play the track.
Note: If a track is not selected after a few seconds of entering a folder, the unit will exit the folder and return
back to the previously selected track/folder.
• To exit a folder, press the 0 (Back) button on the unit, and select a new folder to enter.
In CD Mode, you can perform any of the following operations:
• To start, resume, or pause playback, press the Play/Pause button.
• To stop playback, press the Stop button.
• To rewind or fast-forward through the track, press and hold one of the Search buttons. The track will
rewind/fast-forward at 5 times the normal playback speed. To resume playback, release the button.
• To select a Repeat Playback mode, press the Repeat button. It will cycle through Repeat One (the same track
will repeat indefinitely), Repeat All (the list of all tracks will repeat indefinitely), Repeat FLD (tracks in the
selected folder will repeat indefinitely), and Repeat Off (no tracks will repeat).
• To select the Play Mode, press the Random button. It will cycle through Random
random order [for up to 256 tracks]), Single (S) (the current track will play until its end and then stop), and
Normal (the CD will play from the current track to the end of the CD and then stop).
• To change the Time Mode in the display, press the Time button. It will cycle through Elapsed (E) (how much
time has elapsed of the current track) Remaining (R) (how much time remains of the current track), and Total
Remaining (how much time remains for the total audio CD).
• To eject a CD, press the Eject button. Ejecting will appear in the display while ejecting the CD. No Disc will
appear when there is no disc in the CD slot.
Selecting the Media Playback Mode).
(the tracks will play in a
7