Safety Instructions For Installation; Preparation For Installation - Berbel Connect Manuel De Montage

Installation
3. Installation
3.1 Safety instructions for
installation
D WARNING!
Hazard through disregard of the
installation instructions!
This chapter contains important information
for the safe installation of the device.
☞ Read through this chapter carefully
before installing the device.
☞ Follow the safety instructions.
☞ Carry out the installation as described.
y Electrical work only to be undertaken
by qualified electricians.
D "1.2 Authorised target groups"
(page 32).
y When working at heights, ensure
good stable footing (e.g. stable
stepladder).
y The hob and other parts that can be
touched must be allowed to cool
prior to installation.
y Cables must not be kinked, crushed
or damaged.
y The device must be protected from
moisture and splash water.
y The device must not be mounted
in a metallic enclosure or in close
proximity to metallic objects.
y Only operate the device within a
temperature range between +5 °C
and +40 °C.
36
3.2

Preparation for installation

☞ Familiarise yourself with the
installation situation and the
associated documents:
y Device and installation
instructions
y Extractor hood
y Installation location
☞ Make sure that the correct product
variant is available for your installation
situation.
D "2.1 Product variants" (page 34).
☞ Make sure that all components
required for your installation situation
are available.
☞ Keep the installation area free of
objects that could be in the way or
that could be damaged.
☞ Make sure that the hob and other
parts that could be touched have
cooled down.
☞ Protect the hob and other surfaces
in the installation area (e.g. with thick
cardboard).
6003850_0 – 01.12.2017