Technical Data - Jula 071031 Mode D'emploi

Always use hearing protection!
The declared vibration and noise value, which has been measured by a standardised test method, can be
used to compare different tools with each other and for a preliminary assessment of exposure. The
measurement values have been determined in accordance with EN 792-13+A1:2008.
Warning: The actual vibration and noise level when using power tools may differ from the specified
maximum value, depending on how the tool is used and what kind of workpiece is processed. It is
therefore necessary to determine which safety precautions are required to protect the user, based on an
estimate of exposure in actual operating conditions (taking into account all stages of the work cycle, e.g.
the time when the tool is switched off and when it is idling, in addition to the start-up time).
When unpacking, use the list below to check that all the parts are included. Contact Customer Services if
any parts are missing or damaged.
Nail gun
•
S3 hex key
•
S4 hex key
•
Operating Instructions
•
1. Nail gun
2. Quick-release coupling
3. Lubricating unit
4. Filter
5. Compressed air supply
6. Regulator
7. Air hose

TECHNICAL DATA

Min. operating air pressure
Max. operating air pressure
Nail length
Nail size
Nail capacity
Air intake
Air consumption
Weight
Sound pressure level, LpA
Sound power level, LwA
Vibration level
DESCRIPTION
ILLUSTRATIONS
ENGLISH
4.2 bar
6.9 bar
19 – 50 mm
1.2 mm
100
1/4" NPT
511/min
1.4 kg
81 dB(A), K= 3 dB
94 dB(A), K= 3 dB
72 m/s2, K= 1,5 m/s2
20