Mounting And Operation; Hints On Disposal - auna PRO MIC 900 LED Mode D'emploi

Microphone à condensateur
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
10

MOUNTING AND OPERATION

To get the sound you want, try changing the mic position relative to the
sound source oreven move the microphone around in the recording room
of your studio. Adjusting the angle at which walls face the sound source
can also be helpful. Only when the desired basic sound has been achieved,
should you start to use equalizers and signal processors,if any at all. Due
to the extremely linear frequency response and the high sonic resolution
of your microphone, there is no need for high-frequency "EQing" that can
heavily influence the signal and unnecessarily increase the noise level. The
microphone provides that much-desired transparency which often gets lost
during recording and mixing. There is an adapter on your microphone that
lets you mount it on mic stands with either metric (Europe) or imperial-gauge
threads (North America).
First dismantle the microphone from the stand mount adapter by detaching
the fine-thread shoulder screw at the bottom end of the microphone. Fasten
the adapter onto the microphone stand, place the micropho- ne into it
and tighten the screw again. Basically, the microphone in the stand mount
adapter should stand upright and face the sound source at a right angle.
The angle of the microphone to the sound source influences the sound
of the recording; therefore, experi ment with different positions until you
achieve the desired sound.
NOTE: Please make sure to handle the microphone shaft with attention
and care to avoid damaging the screw thread. In no situation should you
ever apply excessive force.

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/
EU this symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailled information about recycling of this product,
please contact your local council or your household
waste disposal service.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1002878610028787

Table des Matières