Installation Instructions; Installation; Anti-Tumble Measures - Yamaha PDM-4210E Manuel Utilisateur

INSTALLATION INSTRUCTIONS

Installation

• When installing the monitor, use the pedestal.
The pedestal has been used for the illustrations in this manual.
CAUTION
• Use one of the special mount units to install this product. A mount of insufficient strength or inadequate
design can cause overturning or dropping and result in fire, electrical shock or injury. Please note that our
company assumes absolutely no responsibility for personal injuries or property damage caused by use of
other mount units or improper installation.
• Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not attempt this work
yourself. Ask your dealer to provide the name of a qualified installer.
• In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches : For a desktop set-
up) or more between the sides and other objects such as walls, etc., so that the ventilation holes are not
blocked.( ✻ )

Anti-tumble measures

CAUTION
Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury.
Securing to a wall or pillar
Use a commercially available cord or chain, and a clamp to secure the set to a firm wall or pillar.
Securing to desktop
1) Using wood screws (two), fasten the set to the clamping screw holes on the rear of the pedestal as shown.
2) Using commercially available wood screws, secure the set firmly in position.
10
10cm (4 inches) or more
cord or chain for 42"
clamp for 42"
Wall or Pillar
Hook
*
Clamp
Cord
or
chain
Hook
Chain
Wood screw
Two places