Absaar 12T AB-HP12 Mode D'emploi page 41

4. Place the Jack Stand (J) onto the Press Tables (L), tilting the jack stand until it snaps
in place with both ends straddled the Side Supports (H). Make sure that the Jack Stand
(J) lies horizontally. Then feed the Mandrel And Pump Plate (B) down through the
corresponding hole of the Jack Stand (J) and fi x securely with fasteners (M
A
J
5. Hang the Springs (F) on the ring hooks located under the Top Beam (E) and hook the other
ends of the Springs (F) onto the ring hooks located on the Jack Stand (J). Press the Jack
Stand slowly down and have a second person placing the Bottle Jack (A) onto the centre
of the Pump Plate (B) simultaneously. Then release the Jack Stand slowly and allow the
saddle of the bottle jack to slide exactly into the corresponding hole located at the
bottom centre of the top beam.
DE FR EN EN
41
M
3
B
H
J
Figure 6
).
3
E
F
B
Figure 7