Control Panels; Operation; Initial Start-Up; Switching On And Off, Automatic Switch-Off - Nedo mEsstronic 1.0 Mode D'emploi

2 Models

2.2 Control panels

3 Operation

3.1 Initial start-up

o Read operating manual!
o Insert batteries (refer to 3.10).

3.2 Switching on and off, automatic switch-off

The device is switched on when retracted by pressing the
shortest measurable length or the relative value based on the entered zero point are shown
in metres or inches. The device switches automatically off after three minutes of non-use, or
it can be switched off by pressing the

3.3 Measuring system

Change from the metric system (m) to inches (in) by pressing the
The selected measuring system is shown in the display. The metric system is
preset.
mEsstronic 1.0 Operating Instructions
ZERO key
Memory Mode key
UP key
DOWN key
Memory display
ZERO key
HOLD key
OFF key.
13
Memory display
Memory space
Battery display
ON key
Measured data
OFF key Sign for relative value
Memory space
Battery display
ON key
Measured data
OFF key
Sign for relative value
ON key. On the display either the
EN
Unit
Unit
MODE key.