Berger & Schroter 31759 Mode D'emploi page 26

Image Setup
Image Size 12MP (4000*3000), 16MP (4608*3456), 24MP (5632*4224)
Multi-shot Programmable 1~7 photos per trigger
Video Setup
Video Size FHD(1920*1080),HD( 1280*720),VGA( 640*480)
Video Frame 30FPS,15FPS
Video length 05~60 Secs
PIR
Sensitivity High, Middle, Low
Higher sensitivity is 1) more sensitive to movements by smaller subjects;
2) longer detection distance; 3) easier for sensor to detect difference
between body heat and outdoor temperature; 4) easier to trigger camera to
record. In
environment temperature is hard to tell by camera, suggest setting High.
Timer Select "ON", press "OK", to set the beginning time and end time
(hour/minute); camera will only work during the time period user
set. i.e.: 15:00 – 18:00; camera only works during 15:00 – 18:00
Time Lapse Select "ON", press "OK", to set the interval; PIR sensor of camera will be
turned off; camera will shoot pics or video clips automatically upon the
interval user set.
Configurable interval: 5 seconds to 24 hours.
Note: Pls don't turn ON Time Lapse and Delay simultaneously!
Delay Select "ON", press "OK", to set a time interval that you desire
between photos/videos upon motion. This option avoid camera
taking too many photos or videos.
Example: Camera will wait 1 minute between photo/video
recordings with motion if pre-set time interval is 00:01:00
Configurable delay time: 0 second to 24 hours.
Note: Pls don't turn ON Time Lapse and Delay simultaneously!
Other
Battery Type Alkaline/ NI-MH
Choose the correct types of batteries for the camera to perform
its best effects.
SD Cycle Select "ON", press "OK", camera will continue to record
photos/videos by deleting earliest photos or video clips.
Frequency 50HZ, 60HZ; improper setting may cause camera screen flicker
Reset Select "Yes" to reset camera back to factory default settings.
About Firmware version in camera
high temperature environment, body heat of subjects and
26