Starting The Appliance / Temperature Control / Iternal Parts; Use And Control / Before Use; Internal Parts - Kuppersbusch IKE 166-0 Mode D'emploi

GB
Before Use
Wait 4 hours before connecting the appliance to
allow the oil to flow back in the compressor.
Before using the appliance for the first time, wash
the interior and all internal accessories with
lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product,
then dry thoroughly.
Do not use detergents or abrasive powders,
as these will damage the finish.
Remove safety elements used for transportation.
Starting the appliance
Insert the plug into the wall socket and turn the
thermostat knob clockwise beyond position «O»
(OFF).
The thermostat control situated inside the fridge
compartment regulates the temperature of the
appliance.
Turn the thermostat control to the required setting.
Temperature Control
The following effects are of significance in respect
of the interior temperature:
Ambient temperature
Quantity and temperature of the food stored;
Frequency with which the door is opened and how
long it is left open
the location of the appliance.
18
Use and Control
The temperature inside the appliance is
automatically adjusted.
Setting "1" = hightest temperature, warmest
setting
Setting "6" = lowest temperature, coldest
setting.
Setting "0" = Off
A medium setting is generally the most suitable.

Internal Parts

Storage shelves
The shelves can be removed for cleaning.
To permit storage of food packages of various
sizes, the shelves can be placed at different
heights.
To remove the internal shelf pull forward until it
can be tipped up or down and removed.
Please do the same in reverse to insert the shelf
at a different height.
position, to ensure correct air circulation.
The glass shelf above the vegetable drawers
and the bottle shelf should always remain in