Precautions In Use; Installation Location; Maintenance - TAD -DA1000TX Mode D'emploi

PRECAUTIONS IN USE

Installation Location

For installation, select a stable location near the television or
stereo system with which the unit will be used.
To ensure long product life, avoid installing this
unit in the following locations:
• Locations exposed to direct sunlight
• Humid or poorly ventilated areas
• Areas of extreme temperatures
• Areas with vibration
• Dusty or smoky areas
• Areas exposed to grease fumes, steam or heat
(such as a kitchen)
Do not place objects on top of the unit
Do not place objects on top of the unit.
To prevent adverse affects of heat
Do not install the unit on top of amplifiers or other
components that generate heat. When installing in a
rack, try by all means to install the unit in a position below
amplifiers or other components that generate heat.
Turn off power when not in use
Depending on the signal condition of television broadcasts,
if the television is turned on when the unit is already on, a
noise may appear on the television screen. Audible noise
may likewise occur when listening to the radio when unit
is already turned on. This phenomenon does not indicate a
malfunction of either the television, radio tuner, or the unit.
In this event, turn off the power to the unit.
6

Maintenance

To clean the unit, use a polishing cloth to gently wipe the
unit's surface to remove dust. If the surface is extremely
dirty, wipe with a soft cloth dipped in neutral cleanser diluted
five to six times with water and wrung out well. Do not use
volatile chemicals such as paint thinner or benzenes, as
these may corrode the surface of the panels. Do not use
sprays such as insecticides around the unit. If you plan on
using a chemical cleaning cloth, read the precautionary
statements of the chemical cleaning cloth before using.