Simple Steps To Start - Samsung DVE45T6200 Série Manuel D'utilisation

Operations
Icon description
Sensor Dry
Filter Check
Steam
Child Lock
Alarm Off

Simple steps to start

1. Press Power to turn the dryer on.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Dryness, Temp., and Time) as necessary.
4. Select desired options as necessary.
5. Press and hold Start/Pause (Hold to Start).
To change the cycle during operation
1. Press Start/Pause (Hold to Start) to stop operation.
2. Select a different cycle, and repeat steps 2-4 above if necessary.
3. Press and hold Start/Pause (Hold to Start) again to start the new cycle.
42 English
Untitled-3 42
This icon appears when the dryer operates the cycle which
senses the internal humidity to determine the drying time.
This icon displays after every load as a reminder to clean
the lint filter. Clean the lint filter before every cycle and
make sure the filter is properly inserted before starting a
cycle.
This icon appears when the dryer is in steam process. The
dryer sprays water into the drum to deodorize clothes and
reduce static electricity and wrinkles.
This icon indicates that Child Lock is on. For more
information on Child Lock, see page 48.
This icon indicates that the alarm is off. For more
information on Alarm Off, see page 49.
2020-02-13 1:01:21