VESTEL VEH34126 Notice D'utilisation page 73

seconds. " " symbol will appear and remain
illuminated. To unlock the timer buttons,
press and hold the "MODE" button for 2
seconds. The desired operation can then be
carried out.
Audible warning time adjustment
The audible warning time can be set to
any time between "0:00" and "23:59"
hours. The audible warning time is for
warning purposes only. The oven will not be
activated with this function.
When the timer reaches zero, an audible
warning will sound and the symbol
flash on the display. Press any key to stop
the audible warning and the
disappear.
Semi-automatic time adjustment
(cooking period)
This function helps you to cook for a fixed
period of time. A time range between 0 and
10 hours can be set. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
1. Press "MODE". The
symbol will begin to
flash and "000" will be
displayed.
2. Select the desired
time period using the
"+" and "-" keys while
is flashing.
3. The symbol will
remain illuminated, the
time will be saved and
the warning will be set.
will
symbol will
2. Press "MODE" until
you see "dur" and
symbol on the display
screen. The symbol "A"
will flash.
When the timer reaches zero, the oven
will switch off and an audible warning will
sound. The symbols "A" and
Turn both control knobs to the "0" position
and press any key on the timer to stop the
warning sound. The symbols will disappear
and the timer will switch back to manual
function.
Semi-automatic time adjustment
(finishing time)
This function automatically starts the oven
so that cooking will finish at a set time. You
can set an end time of up to 10 hours after
the current time of day. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
EN - 18
3. Select the desired
cooking time period
using the "+" and "-"
keys.
4. The current time
will reappear on
the screen, and the
symbols "A", and
will remain illuminated.
will flash.
2. Press "MODE" until
you see "end" and
symbol on the display
screen. "A" and the
current time of day will
flash.
3. Use the "+" and
"-" buttons to set the
desired finishing time.
4. The current time
will reappear on the
screen, the symbols
"A", and will
remain illuminated.