Krüger & Matz ODYSSEY Mode D'emploi page 33

Owner's manual
Tips:
• The unit can support USB
devices with up to 32 GB
of memory.
• This unit can play MP3.
CLEANING
• Before cleaning the unit, make sure it's fully unplugged from the mains supply.
• To clean the unit, wipe the case with a slightly moist, soft cloth.
• do not use any cleaning fluids containing alcohol, ammonia or abrasives.
TROUBLESHOOTING
If you are having a problem with your system, check this list for a possible solution before
calling for service. If you can not solve the problem from the hints give here, or the system has
been physically damaged, call a qualified person, such as your dealer, for service.
No power
• Ensure the unit is properly connected to
power mains.
• Make sure that the device is turned on.
I cannot find soundbar on my
Bluetooth device
Ensure the bluetooth function is activated
on your bluetooth device.
TV has display problem while viewing
HDR content from HDMI source
Some 4K HDR TVs require the HDMI input
or picture settings to be set for HDR content
reception. For further setup details on
HDR display, please refer to the instruction
manual of your TV.
The subwoofer is idle or the indicator of
subwoofer do not light up
Unplug power cord from the mains socket,
and plug it in again after 4 minutes to reset
the subwoofer.
No sound
• Make sure that the unit is not muted.
Press MUTE or VOL+/VOL– button to
resume sound.
• Switch the soundbar to standby mode.
Then press the power button again to
switch the soundbar on.
• Unplug both the soundbar and the
subwoofer from the mains socket, then
plug them again. Switch on the soundbar.
• Ensure the audio setting of the input
source (e.g. TV, game console, DVD player,
etc.) is set to pCM or dolby digital mode
while using digital (e.g. HDMI, OPTICAL,
COAXIAL) connection.
• The subwoofer is out of range, please
move the subwoofer closer to the
soundbar. Make sure the subwoofer is
within the operational range (the closer
the better).
• The soundbar may have lost connection
with the subwoofer. Re-pair the units
by following the steps on the section
"Connecting subwoofer".
• The unit may not be able to decode all
digital audio formats from the input
source. In this case, the unit will mute.
This is NOT a defect.
33