Dolby Atmos - Krüger & Matz ODYSSEY Mode D'emploi

CONNECTIONS

Dolby Atmos

IMPORTANT: Dolby Atmos
1. To use Dolby Atmos
2. Make sure that "No Encoding" is selected for bitstream in the audio output of
the connected external device (e.g. Blu-ray dvd player, Tv etc.).
3. While entering Dolby Atmos / Dolby Digital / PCM format, the soundbar will
show DOLBY ATMOS / DOLBY AUDIO / PCM AUDIO.
4. While the soundbar is using Dolby Atmos audio, you can only adjust the bass
level of the subwoofer. All other eQ effects will not be available.
HDMI
Using HDMI to connect the soundbar, AV equipment and TV refer to below
illustration:
Method 1: ARC (Audio Return Channel)
The ARC (Audio Return Channel) function allows you to send audio from your ARC-
compliant TV to your soundbar through a single HDMI connection. To enjoy the ARC
function, please ensure your TV is both HDMI-CEC and ARC compliant and set up
accordingly. When correctly set up, you can use your TV remote control to adjust the
volume output (vOL+/- and MUTe) of the soundbar.
Connect the HdMI cable from unit's HdMI (ARC) socket to the HdMI (ARC) socket on
your ARC compliant TV. Then press the remote control to select HDMI ARC.
Tips:
• Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC
must be set to On.
26
®
®
is available only in HDMI mode.
® in HDMI mode, your TV has to support Dolby Atmos
Owner's manual
® .