Introduction; Condition Of Use - LEGRAND KEOR LP Manuel D'installation

This manual contains information for users of the Keor LP battery banks designed for the Keor LP
1,2,3 kVA UPS models.
You are advised to read carefully this handbook and the safety instruction sheet included in
the packaging before installing your uninterruptible power supply, meticulously following the
instructions given herein.
In case of problems with the UPS, please read this manual before contacting technical support;
Please download the latest version of the manual from the web site www.ups.legrand.com.
• The battery bank is supplied with a factory input plug and can be safely connected to the wall
receptacle by the user.
• This battery bank is connected to an UPS. There will be voltage at the output terminals if the UPS
is turned on even if the input AC Mains is not available.
• Make sure that the AC Utility outlet is correctly grounded.
• Do not try to repair the unit by yourself, contact your local supplier or your warranty will be void.
• Use a certified input power cable with the correct plugs and sockets for the appropriate voltage
system.
• To eliminate any overheating of the battery bank, keep all ventilation openings free from
obstruction and do not place any foreign objects on top of the battery bank. Keep the battery
bank 20 cm away from the wall.
12
®
BATTERY BANK
30%~90%
BATTER Y BANK

2 Condition of use

40
200mm/
8 inch

1 Introduction