Remote Control Instructions; Menu Settings - Ltc Audio VP2000 Manuel D'utilisation

ENGLISH
If you are unable to use the keystone correction function to correct the trapezoid distortion, please lower the
projector vertically to the center of the screen.

REMOTE CONTROL INSTRUCTIONS

Power on/off
Mute
Info Press to display information
Pic. Picture mode
Audio Audio mode
Zoom Press to enlarge or reduce the image
Rep. Repeat function (when using USB multimedia
play)
AB AB cycle (when using USB multimedia play)
Aud.T Audio tracks (when using USB multimedia play) ▶
Subt. Subtitle (with USB)
Goto Press to go to a certain time to play (with USB)
USB Press to enter USB mode directly
S Press to switch between the sources
R 16:9 / 4:3 aspect ratio
M Menu
EXIT Exit

MENU SETTINGS

1) Menu setting method
1. Whilst operating the projector, press the menu key. The projector
will show an image as shown in picture 1.
2. Press "▲/▼" key to enter the following submenus: Picture>soun-
d>time>option>channel.
3. After entering the selected submenu, use "◀/▶" buttons to select
the specific item you want to adjust as shown in picture 2.
4. Use "OK" and "◀ / ▶" to adjust the parameters as shown in picture
3.
5. After completion of the adjustments,
press "Menu" again to return to the
previous menu.
6
▲ Up
▼ Down
◀ Left
▶ Right
Previous

Next track

◂◂ Rewind
▸▸ Fast forward
Play/Pause
◼ Stop
OK Confirm
Vol+/- Press to increase or decrease the volume
CH+/- Press to go to the next or previous channel
Flip 360-degree image
FRZ Press to freeze the image
1, 2, Press to choose a TV channel
3, ... 9
© Copyright LOTRONIC 2019