Uniteck UNIDETECT Mode D'emploi page 9

DESCRIPTION
Dear customer, we thank you for purchasing one of our Uniteck products. Please read all instructions
carefully before using this product.
The motion detector, thanks to its PIR (passive infrared technology) sensor, automatically switches your
device when it detects a moving heat source within its range thanks to a state-of-the-art MOS electronic
transistor.
The motion detector is equipped:
- an adjustable twilight switch for 24-hour operation, or depending on the brightness.
- and a timer to set the switching time.
IMPORTANT
• Be sure to observe the maximum electrical current of the detector.
!
• Carry out the fixing and electrical connection without voltage.
INSTALLATION - FIXING
The motion detector can be mounted either on the wall or ceiling.
The best detection is obtained when the movements are perpendicular and not in front of the detector.
Wall mounting Ceiling mounting
www.uniteck.fr
EN
9/24