Using The Chopper; Cleaning And Care; Safety Advice - Electrolux ESB27 Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

USING THE CHOPPER*

11
Attach the chopper blades (M*) on the chopper base shaft (L*) by pushing it down until the blades click into
position. Fill the ingredients in the chopper jar (N*). Attach the chopper base (K*) on the chopper jar by turning it
clockwise until the chopper jar clicks into position.
12
Turn the chopper upside down. Push down the chopper into the blender base (E) and rotate it clockwise to lock.
Note: When locked, the symbol
base.
Caution! To reduce risk of injury, never place the blade assembly on the base without the chopper jar properly
attached.
USING THE THERMO COVER*
13
Thermo Cover performance: Keeps liquids at the same temperature longer, whether cold or hot beverages.
Place the bottle into the cover and close the zipper.

CLEANING AND CARE

14
Unplug the appliance. Accessories are dishwasher safe, except for the blender blade assembly (C), the grinder
blade assembly (H*) and the chopper base (K*). Let all parts dry thoroughly.
Caution! The blades and inserts are very sharp!
15
Clean the blender base with a damp cloth.
Caution! Never immerse the blender base in water!
Do not use abrasive cleaners or scouring pads when cleaning the appliance.
Enjoy your new Electrolux product!

SAFETY ADVICE

Read the following instruction carefully before using the appliance for the first time.
• This appliance shall not be used by children. Keep the appliance and its cord out of reach
of children. Appliances can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and if they understand the
hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• The appliance may only be connected to a power supply whose voltage and frequency
comply with the specifications on the rating plate!
• Never use or pick up the appliance if:
– the supply cord is damaged,
– the housing is damaged.
• If the appliance or the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified person, in order to avoid hazard.
• Always place the appliance on a flat, level surface.
• Always disconnect the appliance from the supply if it is left unattended and before
assembling, disassembling or cleaning.
Do not immerse the appliance in water or any other liquid.
• Do not let cord hang over edge of table or counter, do not let cord contact hot surface,
including the stove.
• Never use accessories or parts made by other manufactures not recommended or sold;
may cause a risk of injury to persons.
• Make sure the motor has completely stopped before disassembling and cleaning.
www.electrolux.com
(* CERTAIN MODELS ONLY)
on the chopper base should be aligned with the symbol on the blender
(* CERTAIN MODELS ONLY)
(* CERTAIN MODELS ONLY)
GB
FR
AR
BG
CZ
DE
DK
EE
FI
HR
HU
IT
LT
LV
NO
PL
RO
RS
RU
SE
SI
SK
TR
UA
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Esb29 série

Table des Matières