Samsung DV48H7400E Série Mode D'emploi page 20

installing your dryer
10. Remove the holder-glass.
11. Exchange the positions of:
: The cover-hinge and handle door
: The holder-hinge and guider-
holder glass
12. Remove the Lever-Door, Cover-
Lever (DV45H7000E(G)* Only) and
then install it on the opposite side.
: DV48(5)H7400E(G)*/
DV45H7200E(G)* Refer Figure. 1
: DV45H7000E(G)* Refer Figure. 2
Refer to the illustrations on the
right to aid you in the assembly
process.
13. Remove the cover-hole (P).
14. Assemble the holder glass and then fasten the 14 screws
that you removed in step 9.
15. Attach the cover-hole.
16. Install the door on the frame-front and then fasten the
4 screws that you removed in step 2.
Check the positions of the screws you installed in the hinge
door.
DV7000HA DRY_DV48H_USER MANUAL_DC68-03170J-08_EN.indd 20
English - 20
Fig 2
Fig 1
l
p
2016/2/25 16:21:07