Maintenance - Cata HOME Instructions Pour L'installation, L'utilisation, L'entretien

NOTE: This process can be carried out in the presence of people and
animals.
NOTE: To cancel this process, press any other filtration mode or the
sterilisation icon or ON/OFF to enter standby mode.

MAINTENANCE

Initial instructions before carrying out maintenance.
IMPORTANT
• Before carrying out any maintenance operation, stop the appliance
and unplug it.
• The maintenance operations the user is permitted to carry out are
limited to filter changes.
• Never submerge the appliance in water or other liquids.
• Do not use abrasive, aggressive or inflammable cleaning products to
clean any part of the appliance.
Filter cleaning and replacement
Filter
PRE-FILTER
ACTIVATED CARBON
FILTER
HEPA FILTER
NONVIRAIR®
STERILISATION CELL
*The cycles in the table are approximate and depend on the operating hours and
level of contamination of the installation location.
NOTE
You can, however, carry out maintenance on the filters whenever you
consider it necessary.
56
Maintenance
method
Clean
-
Rotate filter po-
sition
Filter replacement
-
: The appliance informs you when to carry out maintenance.
Replacement time *
A warning is issued (see p. 57)
Cycle of approximately 4
weeks*
-
A warning is issued (see p. 59)
Cycle of approximately 6-12
months*
A warning is issued (see p. 59)
Cycle of approximately 1-2
years*
-
Spare part
code
02894009
-
-
02894011
-