Information For Users - ATG EPS Mode D'emploi Et Entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Power steering parts
height shall be that which enables you to position the
table between 90 and 95 centimetres from the floor (see
Fig. 2).
CAUTION: Make sure that the machine is placed
in a working area with suitable
environmental conditions and lighting.
The general conditions of the working
environment are of fundamental
importance for accident prevention.
3 INSTRUCTIONS
3.1 DISPOSAL OF THE MACHINE AND
PACKAGING

INFORMATION FOR USERS

In accordance with art. 13 of Legislative
Decree
25th July 2005, no. 151 "Implementation
of
Directives 2002/95/EEC, 2002/96/EEC and 2003/108/
EEC, relative to reducing the use of hazardous
substances
in electrical and electronic appliances and the disposal of
waste", please take note of the following:
• The crossed out wheelie bin symbol found on the
appliance or on the packaging, indicates that the product
must be disposed of separately from ordinary household
waste when it reaches the end of its working life.
• The user must consign the unwanted appliance to
an authorized differentiated waste disposal centre for
electrical and electronic goods, or alternatively, hand
it over to the relative dealer on purchasing a new
appliance of the same type on the basis of a one to
one ratio.
• Differentiated disposal, to enable possible recycling
or environmentally compatible elimination of the
appliance, helps to limit undesirable effects on health
and the environment and promotes the reuse and/or
recycling of the materials which went into making up
the appliance.
WARNING: Sanctions, in accordance with
the relative legislation in force in the
country of use, will be imposed on the user
if the appliance is disposed.
ATG - Eps Testing system

Publicité

Table des Matières
loading

Produits Connexes pour ATG EPS

Table des Matières