Installation And Connection; Operating - Bartscher A151.300 Mode D'emploi

5.2 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Remove the protective plastic wrap from the outer walls. It is important to make sure
that the remains of glue do not remain. In case such remains do remain, remove
them with a suitable solvent.
•
Place the device on top of an even and safe surface which supports the weight of the
device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Do not place the unit near flammable or easily ignitable materials.
•
To ensure best results, make sure the device has no other objects within a space of
10 cm from its sides and 30 cm from the front and back. A space of 30 cm should also
be left above the device, e.g. between the device and the bottom of the next shelf.
•
Place the device so that air can flow freely through the ventilation ducts.
•
Never put any objects on the toaster.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
unit directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.

5.3 Operating

•
Before first use clean the surface of the device with a soft and damp cloth and a mild
cleaning agent.
•
Clean the removable grill grate and toast tongs with warm water and a mild cleaning
agent, rinse the grill grate with clean water and dry it with a soft and dry cloth before
putting it back into the device.
•
Clean the protective grillwork inside the device with a damp cloth in order to remove
the dust formed during the transportation.
•
Connect the device to a suitable single power socket.
•
Before first use start the device for about 10 minutes. During the first use the heat
insulation may cause the formation of smoke and unpleasant smells may be given off.
•
The device is equipped at the top and at the bottom with infrared quartz heating bars.
Infrared heaters can be started together or separately. The double toaster is
additionally equipeed in the middle with infrared heating bars.
- 21 -