Installation Instructions - Screen Research 80 CLF Manuel D'installation

Fixed frame screen installation manual
WARNING: When installing the screen use plugs and screws suitable for the screen's weight and for the type of wall or ceiling on which the mount brackets are to be fixed, based on the
following criteria
Screen width up to cm
Overall weight
See images on the end pages of this manual
1. insert the sliders in the single sections in the number shown in fig. 1; packaging includes 4 (2
horizontal + 2 vertical) sections.
2. prepare the 4 angles by inserting the screws and bolts, without fastening them. See fig. 2.
3. assemble the sections and angles together to form the frame. See fig. 3.
4. insert the reinforcement rings in the screen's buttonholes. See fig. 4.
5. tie the screen to the frame with the elastics provided. See fig. 5.
80 CLF
90 CLF
96 CLF
100 CLF
110 CLF
120 CLF
1.LIMITED WARRANTY Screen Research warrants the product designated herein to be free of manufacturing defects in material and workmanship, subject to the term and conditions hereinafter set forth.
Surface fabric(s) and frames are warranted for a period of five (5) years from the date of invoice by the original purchaser. Motors, motor controllers, remote controls, and related assembly hardware are
warranted for three (3) years parts and labor from date of invoice by the original purchaser.
2.CONDITIONS AND LIMITATIONS This Warranty is subject to the following conditions and limitations. The Warranty is void and inapplicable if the product has been used or handled other than in accordance
with the instructions in the owner's manual, abused or misused, damaged by accident or neglect or in being transported, or the defect is due to the product being repaired or tampered with by anyone other
than Screen Research or an authorized Screen Research dealer or installer. The product must be installed by a professional, duly-authorized Screen Research dealer/custom installer, and maintained
according to the written instructions.
3.RETURNS No product returns accepted without a prior written return authorization from Screen Research. Product must be packed in the original PACKAGE CONTENTS or equivalent packaging in order to
avoid any damage during transportation. The product(s) must be packed and returned to Screen Research or an authorized Screen Research repair center by the customer at his or her sole expense. Screen
Research will pay return freight of its choice. A RETURNED PRODUCT MUST BE ACCOMPANIED BY A WRITTEN DESCRIPTION OF THE DEFECT AND A PHOTOCOPY OF THE ORIGINAL PURCHASE RECEIPT. This
receipt must clearly list model and serial number, the date of purchase, the name and address of the purchaser and authorized dealer and the price paid by the purchaser. Screen Research reserves the right to
modify the design of any product without obligation to purchasers of previously manufactured products and to change the prices or specifications of any product without notice or obligation to any person.
4.REMEDY In the event the product fails to meet the above Warranty, the purchaser's sole remedy under this Limited Warranty shall be to return the product to Screen Research or an authorized Screen
Research service center where the defect will be rectified without charge for parts or labor, during the term of this Limited Warranty.
5.LIMITED TO ORIGINAL PURCHASER This Warranty is for the sole benefit of the original purchaser of the covered product and shall not be transferred to a subsequent purchaser of the product.
6.MISCELLANEOUS Any implied warranties relating to Screen Research products shall be limited to the duration of this warranty. The warranty does not extend to any incidental or consequential damages to
the purchaser. Some states or countries do not allow limitations on how long an implied warranty lasts, or an exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state, or country to country.
7.WARRANTOR Enquiries regarding the above Limited Warranty may be sent to the following address, specific to country where purchased:
8. WARRANTY SUPPORT MANAGED BY AUTHORIZED DISTRIBUTORS Screen Research has authorized distribution in many countries of the world. In each country, the authorized importing Distributor is
responsible for warranty support of products sold in the respective country by that retailer or distributor. Warranty service should be obtained from the importing retailer or distributor from whom you purchased
your product.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: Manual CLF rev2 | 01.01.2018
1.78 FORMAT
N° of sliders in N° of sliders in
HORIZONTAL VERTICAL PROFILES
PROFILES
6 4
6 4
6 4
8 4
8 5
8 5

07 INSTALLATION INSTRUCTIONS

80 90 96
Kg 14 Kg 15 Kg 16
Installation must take place on a vertical surface (wall, curtain wall, etc.), by means of the
brackets provided in the packaging. After assembling the screen, the distance between the two
brackets must be calculated, in consideration of the distance between the corner of the frame
and the bracket itself (see fig. 6,); screw the brackets to the wall, using screws and plugs that
are suitable for the relevant wall and adequate for the screen's weight. Once the brackets are
mounted, hook the screen onto the brackets, as shown in fig. 6.
2.35 FORMAT
N° of sliders in N° of sliders in
HORIZONTAL VERTICAL PROFILES
PROFILES
6
6
6
8
8
8
WARRANTY
100 110 120
Kg 16.5 Kg 17 Kg 18
2.40 FORMAT
N° of sliders in
HORIZONTAL
PROFILES
3 6
4 6
4 6
4 8
4 8
4 8
ENGLISH
N° of sliders in
VERTICAL PROFILES
3
4
4
4
4
4
Page 7