ADEO SCREEN PRESTIGE Manuel D'installation page 15

FRAME ASSEMBLY SCREEN
3
Turn the screen around and fix the bended iron corners on the inside of the screen profiles. On
the TOP of the screen.
4
For screen >2500 mm : Position the stiffener profile.
1- Position one bracket of stiffener in the middle of the horizontal profile.
2- Position the stiffener and the second bracket, when you find the right position of the second
bracket fix it on the profile
3- Position the Stiffener and fix it with the screws on the brackets. Insert the screw in the hole
without threaded.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Doc: PRESTIGE Installation Manual rev4 | 27.10.2020
Please verify that you are working with the latest revision of this document before specifying your screen.
Page 15