Screen Research FSD Manuel D'installation page 24

Manual
BLACK BACKING INSTALLATION OPTION
5
1- Remove protective film from provided self stick tape attached to the screen frame:
a) Select a vertical profile and begin attaching the black backing material working upwards
(pull on the black backing to tighten it)
b) Do the same for the adjacent horizontal frame element (pull on the black backing material
to tighten it).
c) Repeat same for the next vertical element (pull on the black backing material to tighten it).
d) Finish attaching the black backing to the last horizontal element. (pull on the black backing
material to tighten it).
Refer to attached photographs.
b)
a)
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Please verify that you are working with the latest revision of this document before specifying your screen.
Doc: FSD – Installation Manual rev5 | 24.01.2019
Protective and area to work
INSTRUCTION FOR ASSEMBLY THE SCREEN
Page 24