Frequency Channel; Trigger Modes - Elinchrom D-LiTE RX ONE Manuel D'utilisation

Fig. 2 Frequency
channel selector
MODE switch
GROUP switch

Frequency Channel

Note:
Transmitter and the corresponding Transceiver RX, the Universal Receiver or the EL units with
integrated EL-Skyport Receiver must have the same frequency channel settings!
Frequency
Channel
1 (default)
2
3
4
5
6
7
8
EL-Skyport Sync Speed & Standard Mode
The SPEED function is available for Ranger Quadra AS, BXRi 250 / 500 und D-Lite RX ONE and all other
units, when used with the EL-Skyport Universal Speed.
Select "Speed" sync mode
Synchronises SLR cameras up to 1/250 s, or compact digital cameras up to 1/2850 s
- Select "Group" or "All" mode.
- Press test push button for minimum 5 seconds until the STATUS LED flashes two times.
- Release test push button.
- Now the EL-Skyport Transmitter Speed works in "SPEED" mode (r.2 mode).
Select "Standard" triggering mode
Synchronises SLR cameras up to 1/200 s, or compact digital cameras up to 1/1600 s
- Select "Group" or "All" mode.
- Press test push button for minimum 5 seconds until the STATUS LED flashes one time.
- Release test push button.
- Now the EL-Skyport Transmitter Speed works in "STANDARD" mode.
EL-Skyport Module Configuration:
Only possible with EL-Skyport PC / MAC software v 3.0 and higher.
- Power-Save Timer, individual programmable or disabled.
- Trigger delay is programmable from 250 ms up to 15 s.
- Download the FREE EL-Skyport Software from www.elinchrom.com
Slide Button configuration
1 2
Off Off
On Off
Off On
On On
Off Off
On Off
Off On
On On
RX feature button
Power decrease
RX feature button
Power increase
or modelling lamp
toggle
Flash Test / Flash Mode /
Configuration button
Flexible swivel
Antenna 360 ̊
Status LED
Frequency
/ Mhz
3
Off 2456
Off 2458
Off 2460
Off 2462
On 2469
On 2471
On 2473
On 2475
English
19