Rec Off Timer - Teac LP-R550USB Mode D'emploi

This unit can record from the radio or other equipment connected
to the unit by setting the end recording time with the REC OFF
timer.
The REC OFF timer function does not work when the unit records
from PHONO or TAPE.
Press the PHONO/TAPE/AUX button or the FM/AM button
1
to select the source to be recorded.
To record an external source connected to the AUX IN jacks,
select AUX.
Load a recordable CD-R or CD-RW disc into the unit.
2
Make sure "NO TOC" and "CD-R" (or "CD-RW)" indicators light on
the display, or the RECORD button will not work.
< Before recording, tune in the radio station, Select a track-number-
assignment mode setting, set the recording level and prepare the
external source connected to the AUX IN jack.
Press the RECORD button to set the unit to record pause
3
mode.
The red indicator on the RECORD button blinks and J appears
on the display.
30

REC OFF Timer

< No button will work while "bUSY" is displayed. Wait about 10
seconds until "bUSY" disappears from the display.
Press the RECORD button again.
4
"OFF" and the recording time (minutes/seconds) will be
displayed.
Press the . m or , / button to set the end
5
recording time.
Each time the button is pressed, the display will move up (down)
by 5 minutes.
< The time set will be memorized and will be displayed the next
time you will use this function. To change the recording time,
follow the steps
< The recording time can be set up to the maximum recordable
time of the disc. When the disc has less than 5 minutes of
recordable time, the recording time will be regulated by the
remaining time.
Example: CD-RW with a recordable time of "74 minutes"
Press the skip buttons (.m/,/) to set the time at
5-minute intervals up to 74 minutes.
Press the PLAY/PAUSE button (y/J) to start recording.
6
When recording starts, recording time starts decreasing.
Recording will stop when the time reaches to "00:00".
< When recording is finished, the recording timer will be cancelled.
< You can use the PLAY/PAUSE button (y/J) and the TRACK
INCREMENT button during the timer recording.
< Press the STOP button (H) to stop recording.
< Each time you press the DISPLAY button, the display cycles
through the remaining time of recording, remaining recordable
time of the disc, and the recording source.
recording time
to .
1 5
10:00 ......... 70:00
(5-minute intervals)
5:00 74:00