DeWalt DWMT70779 Guide D'utilisation page 6

FEATURES
SPraY Gun BoDY
The multi-purpose body of the spray
gun has a conventional siphon
design.
MaTerIal cuP
The cam style cup (e) of the spray
gun can hold 32oz (1000 cc). The cup
is easily removed from the spray gun
body by pushing the
material cup release tab (D).
MaTerIal FIlTer
The material filter (c) is used
to protect against contaminants
and small particles.It is located
inside of the spray gun,
between the material cup (e)
and air cap (a).
aIr caP hornS
The position of the air cap (a)
horns (B) allow two spray
patterns.
horizontal position
Vertical position
D
E
A
B
FluID conTrol KnoB
The fluid control knob (J)
allows control of the material
amount released (the density
of the "fan spray").
aIr VoluMe conTrol
KnoB
The air volume control
knob (h) controls the air flow
and allows for a MAX of 40
PSI to reduce over-spray and
efficient air consumption.
PaTTern conTrol KnoB
The pattern control knob (I) allows the width of the "fan spray" to
be adjusted.
FIXeD hooK
The spray gun includes a fixed hook (K) on the body to allow for
convenient hanging when
stored.
aIr InleT
The tool's air inlet (G) located
at the bottom of the handle
is used for connecting an air
supply with a standard 1/4"
NPT American thread.
6
K
J
H
I
G