Wolf Gourmet WGCM100S Guide D'utilisation Et D'entretien page 15

GETTING STARTED
USING THE PROGRAM START TIME FUNCTION
The START TIME function allows you to program the Coffee System to brew at a later
time.
If you have not set the current time of day, please follow the
1.
steps shown in "Setting the Time of Day for the First Time."
Press and hold the PROG button for more than 1/2 second to
2.
activate the Set Start Time function. The PROG light will flash
and START TIME will be displayed next to the clock digits.
If the programmed start time has not been set previously, the
default start time of --:-- will flash in the display.
If the programmed start time has been set previously, the
previous start time will flash in the display.
Turn the TIME/CUPS knob clockwise to increase time. Turn
3.
counterclockwise to decrease time.
When you have finished setting the time, release the knob.
4.
After 5 seconds, the clock will change to time of day and the
PROG light will remain on.
If there is no water in the reservoir, the ADD WATER icon will
5.
display and the PROG light will not come on.
To turn off the PROG function, press the PROG button again
6.
for less than 1/2 second.
15