Installation Instructions; Unpacking; Positioning The Appliance - Important Considerations - Krushr F86/024 Manuel D'installation

US/Can
Unplug the appliance from outlet before servicing
Do not modify the plug attached to the appliance
Use only with a grounded receptacle
When not in use or uninstalled the appliance should be kept in a clean, cool
and dry environment and with the main door firmly closed. The power cord
must be kept away from any heat source and sharp instruments.

Installation Instructions

Unpacking

IMPORTANT - Provisions for lifting and carrying should be made as this
product weighs over 40 lbs (18 kg)
Remove the appliance from its packaging.
Positioning the appliance – Important Considerations
Securing the appliance in a standalone installation
The floor anchor (shown in dia. 8) should be fitted when the appliance is used
in a standalone installation where no surrounding cabinetry is available to fix
the appliance in position. The floor anchor is used to secure the rear feet to
the floor to avoid the appliance tipping forward when the door is fully opened.
When using the floor anchor in a standalone situation, the appliance can only
be installed with the legs fully retracted. To attach the floor anchor to the
appliance, first extend the rear legs by approximately 0.6". Slide the legs into
the floor anchor. Once in position, retract the legs fully. This locks the floor
anchor to the appliance. To remove, reverse these instructions.
8