Numatic ET 4045 Mode D'emploi page 8

Only use brushes provided with the appliance or those specified in the instruction manual.
The use of other brushes may impair safety.
WARNING
A full range of brushes and accessories are available for this product.
Only use brushes or pads which are suitable for the correct operation of the machine for the specific task being
performed.
It is essential that this equipment is correctly assembled and operated in accordance with current safety regulations.
When using the equipment always ensure that all necessary precautions are taken to guarantee the safety of the
operator and any other persons who may be affected.
Wear nonslip footwear when scrubbing. Use a respiratory mask in dusty environments.
The machine, while charging, must be positioned so that the mains plug is easily accessible.
When cleaning, servicing or maintaining the machine, replacing parts or converting to another function the power
source shall be switched off.
Mains operated machines shall be disconnected by removing the power plug, and battery operated machines shall be
disconnected by switching off the isolating key.
Machines left unattended shall be secured against unintentional movement.
Operators shall be adequately instructed as to the correct use of the machine.
Brush Motor Vac Motor
1500W 1000W
Gross Weight Protection Class
Full
97 Kg Class 1
Brush Motor Vac Motor
1500W 1000W
Gross Weight Protection Class
Full
97 Kg Class 1
Brush Motor Vac Motor
1500W 1000W
Gross Weight Protection Class
Full
97 Kg Class 1
Power Sound
Pressure
220-240v 50Hz 80 dB(A)
220v 60Hz
120v 60Hz
110v 50Hz
Hand Arm
Vibration
1.4 +/- 0.05ms² 400 mm
Power Sound
Pressure
220-240v 50Hz 80 dB(A)
220v 60Hz
120v 60Hz
110v 50Hz
Hand Arm
Vibration
1.4 +/- 0.05ms² 500 mm
Power Sound
Pressure
220-240v 50Hz 80 dB(A)
220v 60Hz
120v 60Hz
110v 50Hz
Hand Arm
Vibration
1.4 +/- 0.05ms² 400 mm
Speed
50Hz = 150rpm
60Hz = 180rpm
Pad Net Weight
57 Kg
Speed
50Hz = 150rpm
60Hz = 180rpm
Pad Net Weight
57 Kg
Speed
50Hz = 150rpm
60Hz = 180rpm
Pad Net Weight
57 Kg
8
Data
TT 4045
Brush Dimensions
450mm Width - 470 mm
Length - 890 mm
Height - 1180 mm
Cleaning Water Capacity
Range
42m 40 L
TT 4055
Brush Dimensions
550mm Width - 570 mm
Length - 1030 mm
Height - 1180 mm
Cleaning Water Capacity
Range
42m 40 L
ET 4045
Brush Dimensions
450mm Width - 470 mm
Length - 890 mm
Height - 1180 mm
Cleaning Water Capacity
Range
42m 40 L