Introduction - Omnitronic UHF-215 Mode D'emploi

Wireless Microphone System
For your own safety, please read this user manual carefully
Every person involved with the installation, operation and maintenance of this device has to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

1. INTRODUCTION

Thank you for having chosen an OMNITRONIC UHF-215. If you follow the instructions given in this manual,
we can assure you that you will enjoy this device for many years.
Unpack your OMNITRONIC UHF-215.
Please make sure that there are no obvious transport damages. Should you notice any damage, do not take
the device into operation and immediately consult your local dealer.
1.1 Features
Wireless UHF Mic set
• Stationary receiver for 16 channels
• Channels switchable via DIP-switches
• Operation in the low-interference UHF-band
• With LED-display for power supply and signal input
• Squelch-control to eliminate the possibility of annoying noise bursts coming through your receiver
• With output level control
• With external transformer
• Low price/high quality
• Set includes wireless microphone
• For 2 x 1.5 V Mignon batteries (type AA)
• Not compatible with 115/215/315/415-series
• License-free and approved in Germany
OPERATING INSTRUCTIONS
UHF-215
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
before you initial start-up.
CAUTION!
12/36 00024570.DOC, Version 1.2