ADEUNIS LoRaWAN DRY CONTACTS Guide Utilisateur page 69

LoRaWAN DRY CONTACTS - Guide utilisateur / User guide version V2.0.0
254 Configuration Canal 4
255 Configuration Canal 5
256 Configuration Canal 6
257 Configuration RX2
258 Type of tape (only in 915)
280 NETWORK ID
281 DEVICE ADDRESS
NOTE 1 :
The «Over The Air Activation» (OTAA) mode uses a join phase before being able to transmit on the network. This mode uses the APP_EUI (S214
and S215) and APP_KEY (S216 to S219) codes during this phase to create the keys for network communication.
Once this phase is completed, the codes APP_sKEY, NWK_sKEY and Device address will be present in the corresponding registers.
A new join phase is started every time the product comes out of Command mode, a reset is performed or the product is turned on.
Codes:
• APP_EUI identifier for global use (provided by default by adeunis®)
• APP_KEY device application key (provided by default by adeunis®)
The «Activation by personalization» (ABP) mode has no join phase; it transmits directly on the network using the codes NWK_sKEY (S222 to
S225), APP_sKEY (S226 to S229) and Device address (S281) to communicate.
Codes:
• NWK_sKEY network session key (provided by default by adeunis®)
• APP_sKEY applicative session key (provided by default by adeunis®)
• DEVICE ADDRESS Address of the device in the network (provided by default by adeunis®)
NOTE 2:
By default, channels 0 to 2 use the default settings of the LoRaWAN network; the other 4 channels are inactive. A register value different from 0
or 1 allows the channel to be configured as follows:
Bit
7
Description
E.g.:
Decimal (868)
Hexadecimal
(915)
Decimal (868)
Hexadecimal
(915)
Decimal (868)
Hexadecimal
(915)
Decimal (868)
Hexadecimal
(915)
Decimal
Hexadecimal
Hexadecimal
6 5
Channel frequency
868100
Default: 0 (868); 1 (915)
0: Channel disabled
Other: User configuration (Note2)
Default: 0 (868); 1 (915)
0: Channel disabled
Other: User configuration (Note2)
Default: 0 (868); 1 (915)
0: Channel disabled
Other: User configuration (Note2)
Default : 1
0 : Channel disabled
1 : Default configuration: LoRaWAN
Autre : User configuration
Default: 3
Min/max: 0 to 3
Default: 0
Lecture seule
Default: 0
4 3 2 1
DR Max DR Min
5
FR
EN
0
3
69 of 89