NetSpa CAIMAN Guide D'installation Et D'utilisation page 25

3.3. Assembling
1) Install the double skin cover to
where you want to install your spa and
pull out the straps.
4) Connect the inflation hose to the
pump on the socket .
7) Before inflating, check that the liner
fittings fall in front of double skin cover.
Inflate the inflatable spa for about 10
minutes. Ensure that the spa is firmly
inflated.
10) Insert the cartridge into its filter
holder and then screw on the suction
fitting inside the basin.
2) Unfold the inflatable spa over the
double skin cover.
5) Insert the inflation hose into the
inflatable spa
8) Remove the inflation hose and
screw the cap firmly in place.
11) Check that the drain plug is closed
properly.
3) Bring the pump unit to the inflatable
spa.
6) Connect the pump unit then press
the button to inflate the spa.
The air flow valve prevents your spa
from over-inflating.
9) Connect the unit pump to the pool
using the 3 connectors to screw.
Ensure the icons on the pump and the
pool match up
12) Fill the spa pool until the indicated
fill level is reached.
Your spa is ready to be used.
EN
25