EXIT Toys Deluxe spa Mode D'emploi page 18

If error code is still displayed on the control Box, please do the following instrutions:
1). Check that the water line is between the high and low limits.
2). Clean or replace the filter cartridge.
3). Unscrew and clean the 2 nozzles (Entry and exit of water) i nside the spa and
remove wastes if necessary (Neaf, hairs, fur, skin...)
4). Check that the propeller of the filter pump does not contain foreign matter.
Cut the spa again electrically for 5 minutes and re-connect it, if the error code is still
displayed on the control box please contact
the Service Center.
9.Warranty
EXIT Toys products have been inspected and found free of defects prior to leaving the
factory. EXIT Toys warrants this product against defects in material and workmanship
for a period of time, 1 year for the pump and 6 months for the liner,unless local
law has special requirement. EXIT Toys warrants this product begins on the date of
19
MSP-35101-V02